Pattern Master
|
|
|
|
Model No. 8800D
| • |
Impact resistant, rustproof polymer construction |
|
Model No. 8800M
| • |
Heavey-duty die cast zinc base construction |
|
| |
- Create Your Own Pattern
- Water coverage up to 4,000 sq. ft. (86 ft. x 59 ft.)
- Flexible spray tube bends up or down to set width of coverage
- Spray pattern adjusts to fit most square or rectangular shapes
- Flip action dial adjusts watering pattern from left to right for full, partial, and in-between settings
- Standard U.S. - ASH hose thread available with BSP converter for export.
|
Fast Watering. 1 Hr. 20 min. of watering = 1/4” of water
Flexible spray tube allows maximum adjustment for precise watering patterns with narrow to wide coverage.
 |
 |
 |
| Before using the sprinkler, attach the black linkage arm to the back of the control dial. |
Distance Control – The multi-position control knob offers 4 main settings with a variety of in-between settings for fine-tuning the coverage area. |
Width Control – Squeeze tabs on ends of tube to release and reposition. Bend tube down for more distance or straighten for less. |
Easy Care – The sealed water motor requires no maintenance. Things that will help sprinkler operate at its best are:
Clean the inlet filter washer regularly by removing and rinsing.
Remove the red plug located at the end of the spray tube to clean spray jets. Use a gentle water flow to flush out tube and the tip end of the plug to clear jets.
Drain sprinkler after use, especially in cold weather. Freezing will damage the sprinkler if water is left inside.
Do not rotate spray tube by hand from side to side as it will damage water motor.