Standard Oscillator
 |
 |
 |
|
Model No. 8836D
|
| • |
Water coverage up to 3,600 sq. ft. (55 ft. x 66 ft.) |
| • |
17 precision spray jets on molded tube provide even coverage |
| • |
Extra-wide base for added stability |
|
|
|
Model No. 8830D
|
| • |
Water coverage up to 3,000 sq. ft. (48 ft. x 63 ft.) |
| • |
15 precision spray jets on molded tube provide even coverage |
|
|
|
Model No. 8826
|
| • |
Water coverage up to 2,600 sq. ft. (45 ft. x 58 ft.) |
| • |
15 spray jets molded directly onto spray tube |
|
|
 |
 |
| |
Model No. 8840PM
|
| • |
Water coverage up to 4000 sq. ft. (86 ft. X 59 ft.) |
| • |
19 solid brass jets are set into an aluminum tube for dependability and long life |
| • |
Extra-wide base for added stability |
|
|
| |
Model No. 8835PM
|
| • |
Water coverage up to 3500 sq. ft. (52 ft. X 67 ft.) |
| • |
17 solid brass jets are set into an aluminum tube for dependability and long life |
| • |
Extra-wide base for added stability |
|
|
- Multi-position, flip action dial for a variety of watering patterns
- Threaded tube tip for cleaning spray jets
- Sealed water motor chamber in housing prevents dirt from damaging internal gears
- Safety gear prevents damage to motor and spray tube linkage
- Metal filter washer prevents clogging
- Impact resistant, rustproof polymer construction
- Standard U.S. - ASH hose thread available with BSP converter for export.
| | |
Fast Watering. 1 Hr. 30 min. of watering = 1/4” of water
|
Before using the sprinkler, attach the black linkage arm to the back of the control dial. |
 |
Distance Control – The multi-position control knob offers 4 main settings with a variety of in-between settings for fine-tuning the coverage area. |
 |
Easy Care – The sealed water motor requires no maintenance. Things that will help sprinkler operate at its best are:
Clean the inlet filter washer regularly by removing and rinsing.
Remove the red plug located at the end of the spray tube to clean spray jets. Use a gentle water flow to flush out tube and the tip end of the plug to clear jets.
Drain sprinkler after use, especially in cold weather. Freezing will damage the sprinkler if water is left inside.
Do not rotate spray tube by hand from side to side as it will damage water motor. |