 |
|
|
| Model No. 8800D
| • |
Impact resistant, rustproof polymer construction |
|
Model No. 8800M
| • |
Heavey-duty die cast zinc base construction |
|
- Water coverage
up to 4,000 sq. ft. (86 ft. x 59 ft.)
- Flexible spray
tube bends up or down to set width of coverage
- Spray pattern adjusts
to fit most square or rectangular shapes
- Flip action dial
adjusts watering pattern from left to right for full, partial, and in-between
settings
- Standard U.S. -
ASH hose thread available with BSP converter for export.
|
Fast
Watering. 1 Hr. 20 min. of watering = 1/4” of water
 Flexible
spray tube allows maximum adjustment for precise watering patterns with narrow
to wide coverage.
 |
 |
 |
| Before
using the sprinkler, attach the black linkage arm to the back of the control dial.
|
Distance
Control – The multi-position control knob offers 4 main settings with
a variety of in-between settings for fine-tuning the coverage area. |
Width
Control – Squeeze tabs on ends of tube to release and reposition. Bend
tube down for more distance or straighten for less. |
 Easy
Care – The sealed water motor requires no maintenance. Things that will
help sprinkler operate at its best are:
Clean the inlet filter washer regularly by removing and rinsing.
Remove the red plug located at the end of the spray tube to clean spray jets.
Use a gentle water flow to flush out tube and the tip end of the plug to clear
jets.
Drain sprinkler after use, especially in cold weather. Freezing will damage the
sprinkler if water is left inside.
Do not rotate spray tube by hand from side to side as it will damage water motor.
|
