Water coverage
up to 3,600 sq. ft. (55 ft. x 66 ft.)
•
17 precision spray
jets on molded tube provide even coverage
•
Extra-wide base
for added stability
Model
No. 8830D
•
Water coverage
up to 3,000 sq. ft. (48 ft. x 63 ft.)
•
15 precision spray
jets on molded tube provide even coverage
Model
No. 8826
•
Water coverage
up to 2,600 sq. ft. (45 ft. x 58 ft.)
•
15 spray jets molded
directly onto spray tube
Multi-position,
flip action dial for a variety of watering patterns
Threaded tube
tip for cleaning spray jets
Sealed water motor
chamber in housing prevents dirt from damaging internal gears
Safety gear prevents
damage to motor and spray tube linkage
Metal filter washer
prevents clogging
Impact resistant,
rustproof polymer construction
Standard U.S. - ASH hose
thread available with BSP converter for export.
Additional Information
Fast Watering. 1
Hr. 30 min. of watering = 1/4” of water
Before using the
sprinkler, attach the black linkage arm to the back of the control dial.
Distance Control
– The multi-position control knob offers 4 main settings with a variety
of in-between settings for fine-tuning the coverage area.
Easy Care –
The sealed water motor requires no maintenance. Things that will help sprinkler
operate at its best are:
Clean the inlet filter washer regularly by removing and rinsing.
Remove the red plug located at the end of the spray tube to clean spray jets.
Use a gentle water flow to flush out tube and the tip end of the plug to clear
jets.
Drain sprinkler after use, especially in cold weather. Freezing will damage the
sprinkler if water is left inside.
Do not rotate spray tube by hand from side to side as it will damage water motor.
