SPRINKLERS : MEDIUM COVERAGE : TIMER OSCILLATING SPRINKLERS
Pattern Master | Turbine Oscillator | Metal Oscillator | Standard Oscillator | Turbine Rotor | Rotary Sprinkler

Model No. 9936 • Waters up to 3,600 sq. ft. • 17 precision spray jets for a variety of watering patterns	Model No. 9930D • Waters up to 3,000 sq. ft. • 15 precision spray jets on molded tube provide even coverage

Fast Watering. 1 Hr. 30 min. of watering = 1/4” of water

	Before using the sprinkler, attach the black linkage arm to the back of the control dial.
	Timer/Depth Control – Dial turns clockwise direction only. Align desired setting with arrow. Once set for time or depth, the sprinkler will shut off automatically. For manual shutoff, rotate dial to off. The settings are base on an average 50 PSI water pressure. If you have lower pressure the sprinkler may water longer than the dial setting. If you have higher pressure, the sprinkler may shut off sooner. The inches of depth settings are based on full width coverage. At any other coverage settings, the water depth in inches will be greater than shown on the dial.We suggest testing the settings due to variations in local water pressures and watering patterns used, and then adjusting as needed.
	Distance Control – The multi-position control knob offers 4 main settings with a variety of in-between settings for fine-tuning the coverage area.
	Easy Care – The sealed water motor requires no maintenance. Things that will help sprinkler operate at its best are: Clean the inlet filter washer regularly by removing and rinsing. Remove the red plug located at the end of the spray tube to clean spray jets. Use a gentle water flow to flush out tube and the tip end of the plug to clear jets. Drain sprinkler after use, especially in cold weather. Freezing will damage the sprinkler if water is left inside. Do not rotate spray tube by hand from side to side as it will damage water motor.